QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1815|回复: 23

Fedora上网的问题

[复制链接]
发表于 2004-3-4 22:18:16 | 显示全部楼层 |阅读模式
我是光纤宽带,需要PPPOP拨号。在Fedora中上不了网,有几个问题请教

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注册

×
 楼主| 发表于 2004-3-4 22:20:14 | 显示全部楼层
还有为什么我激活时出现这个提示

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注册

×
回复

使用道具 举报

发表于 2004-3-5 00:37:08 | 显示全部楼层
是不是root用户
回复

使用道具 举报

 楼主| 发表于 2004-3-5 02:12:01 | 显示全部楼层
是ROOT用户
回复

使用道具 举报

 楼主| 发表于 2004-3-5 02:22:31 | 显示全部楼层
是ROOT用户
回复

使用道具 举报

 楼主| 发表于 2004-3-5 17:08:06 | 显示全部楼层
顶!
回复

使用道具 举报

 楼主| 发表于 2004-3-5 20:00:54 | 显示全部楼层
再顶!
回复

使用道具 举报

发表于 2004-3-5 20:07:53 | 显示全部楼层
在命令行下用adsl-setup试试。
[code:1]#adsl-setup

Welcome to the Roaring Penguin ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name :

输入连入宽带网的账号

>>> Enter the Ethernet interface connected to the ADSL modem
For Linux, it will be ethn, where 'n' is a number.

(default eth0):

输入准备接入互联网的网卡名,如果是缺省的就直接敲回车键。

>>> Enter the demand value (default no):

直接回车。

DNS

>>> Enter the DNS information here:

输入有服务商提供的域名服务器地址,或输入server,由服务商自动提供。

PASSWORD

>>> Please enter your PPPoE password:

>>> Please re-enter your PPPoE password:

输入上网密码。

FIREWALLING
>>> Choose a type of firewall (0-2):

选择防火墙,选0。

** Summary of what you entered **

Ethernet Interface: eth0

User name: xxxx //你的用户名


Activate-on-demand: No

DNS: server

Firewalling: NONE

>>> Accept these settings and adjust configuration files (y/n)?

最后,对上述配置进行确认。确认后的配置系统会写入/etc/ppp/pppoe.conf文件,可以直接对其进行修改。

配置完成后,就可以进行拨号了。

#adsl-start

如果屏幕上出现:“... Connected!”就说明拨号成功了。这时可以用ifconfig命令查看,结果除了原本有的eth0、lo外又增添了ppp0。 [/code:1]
回复

使用道具 举报

 楼主| 发表于 2004-3-5 22:31:05 | 显示全部楼层
还是不上了

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
Enter the demand value (default no):

DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here:

PASSWORD

Please enter your Password:
Please re-enter your Password:

USERCTRL

Please enter 'yes' (two letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes):

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
Choose a type of firewall (0-2): 0

Start this connection at boot time

Do you want to start this connection at boot time?
Please enter no or yes (default no):yes

** Summary of what you entered **

Ethernet Interface: eth0
User name:          CDE7106144
Activate-on-demand: No
DNS:                Do not adjust
Firewalling:        NONE
User Control:       yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
  (But first backing it up to /etc/ppp/chap-secrets.bak)
  (But first backing it up to /etc/ppp/pap-secrets.bak)



Congratulations, it should be all set up!

Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.
回复

使用道具 举报

发表于 2004-3-5 22:53:25 | 显示全部楼层
adsl-start
回复

使用道具 举报

 楼主| 发表于 2004-3-6 09:57:46 | 显示全部楼层
[quote:08dcea960e="cobranail"]adsl-start[/quote]

输入这个后没有任何反应
回复

使用道具 举报

 楼主| 发表于 2004-3-6 22:01:18 | 显示全部楼层
顶啊!!!!
回复

使用道具 举报

发表于 2004-3-7 01:38:51 | 显示全部楼层
[quote:d207f6ed57="天蓝色"][quote:d207f6ed57="cobranail"]adsl-start[/quote]

输入这个后没有任何反应[/quote]
没有任何提示?
回复

使用道具 举报

发表于 2004-3-7 01:50:53 | 显示全部楼层
是tp-link 8139芯片吗?我也曾经这样,死活搞不通。
试一下删掉eth0  ,重建一个。
回复

使用道具 举报

 楼主| 发表于 2004-3-7 13:26:17 | 显示全部楼层
是花王8139的
eth0删掉了,我以经重建过N次了,还是不行,一激活就出错。
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-8 20:04 , Processed in 0.069197 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表