编译内核后不能启用声卡

liqishan

编译内核后不能启用声卡，信息如下：
The i810_audio driver could not be loaded.  This soundcard may not be compatible with Red Hat Linux.
还有不能加载vfat分区，
请问是什么原因？？？？

liqishan

可以在进入系统后加载，但让它自动加载就会出现failed

liqishan

查看系统启动的文件是什么？在哪里？

liqishan

以下是我的初始化信息，现在可以发声了，但我不却定不有没有其它问题
还有我用gmplayer播电影时，只能按原始屏幕播，全屏时可视屏幕和原始的一样，可能是视输出的问题，但我不会弄；
Linux version 2.6.0-test6 (root@liqishan) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Sat Oct 11 20:17:54 CST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000077f0000 (usable)
BIOS-e820: 00000000077f0000 - 00000000077f3000 (ACPI NVS)
BIOS-e820: 00000000077f3000 - 0000000007800000 (ACPI data)
BIOS-e820: 0000000007800000 - 0000000008000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
119MB LOWMEM available.
On node 0 totalpages: 30704
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 26608 pages, LIFO batch:6
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 GBT                                       ) @ 0x000f6560
ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x077f3000
ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x077f3040
ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x077f6980
ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 1717.714 MHz processor.
Console: colour VGA+ 80x25
Memory: 117240k/122816k available (2328k kernel code, 5020k reserved, 815k data, 264k init, 0k highmem)
Calibrating delay loop... 3383.29 BogoMIPS
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU:     After all inits, caps: 3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf9d50, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX [8086/24c0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 5 for device 0000:00:1f.1
PCI: Sharing IRQ 5 with 0000:00:02.0
divert: not allocating divert_blk for non-ethernet device lo
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
VFS: Disk quotas dquot_6.5.1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 2048 Unix98 ptys configured
Real Time Clock Driver v1.12
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
8139cp: pci dev 0000:01:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 0000:01:00.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xc000, 00:0a:eb:1c:eb:7d, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Linux video capture interface: v1.00
Mediavision Pro Movie Studio driver 0.02
PMS type is 0
Board not found.
V4L-Driver for Vision CPiA based cameras v1.2.3
request_module: failed /sbin/modprobe -- cpia_pp. error = -16
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 5 for device 0000:00:1f.1
PCI: Sharing IRQ 5 with 0000:00:02.0
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD400BB-00DEA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MITSUMI CD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
Intel 810 + AC97 Audio, version 0.24, 20:14:28 Oct 11 2003
PCI: Found IRQ 9 for device 0000:00:1f.5
PCI: Sharing IRQ 9 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0xe400 and 0xe000, MEM 0xe2081000 and 0xe2082000, IRQ 9
i810: Intel ICH4 mmio at 0xc800d000 and 0xc800f000
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
i810_audio: setting clocking to 48730
cmpci: version $Revision: 5.64 $ time 20:14:32 Oct 11 2003
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h-2.5, 20:14:36 Oct 11 2003
btaudio: driver version 0.7 loaded [digital+analog]
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
no UART detected at 0xffff
Motu MidiTimePiece on parallel port irq: 7 ioport: 0x378
specify port
ALSA device list:
  #0: Dummy 1
  #1: Virtual MIDI Card 1
  #2:
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 218k freed
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 264k freed
EXT3 FS on hda9, internal journal
Adding 514040k swap on /dev/hda10.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: codepage cp936 not found
eth0: link up, 10Mbps, half-duplex, lpa 0x0000

Dragonfly

FAT: codepage cp936 not found ?

in NLS have u choose 936?