|
|
Linux version 2.6.18 (root@jaye-desktop) (gcc version 3.4.1) #6 Sun Apr 5 14:04:41 CST 2009
CPU: ARM920T [41009200] revision 0 (ARMvundefined/unknown), cr=00003177
Machine: SMDK2410
Memory policy: ECC disabled, Data cache writeback
CPU S3C2410 (id 0x32410000)
S3C2410: core 202.800 MHz, memory 101.400 MHz, peripheral 50.700 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists. Total pages: 8192
Kernel command line: mem=32M console=ttySAC0 init=/linuxrc root=/dev/ram initrd=0x30800000,0x00800000 ramdisk_size=4096 rm
irq: clearing pending status 00004000
irq: clearing pending status 00008000
irq: clearing pending status 00800000
irq: clearing pending status 10000000
irq: clearing subpending status 00000093
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00500000, tcnt a509, tcfg 00000200,00000000, usec 00001e4c
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 21248KB available (2376K code, 491K data, 116K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 8192K
NET: Registered protocol family 16
S3C2410 Power Management, (c) 2004 Simtec Electronics
S3C2410: Initialising architecture
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics
DMA channel 0 at c2800000, irq 33
DMA channel 1 at c2800040, irq 34
DMA channel 2 at c2800080, irq 35
DMA channel 3 at c28000c0, irq 36
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
fuse init (API version 7.7)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ERROR: s3c2410x_io_write_word(0x4d000000) = 0xfffffffe
ERROR: s3c2410x_io_write_word(0x4d000000) = 0x00000678
ERROR: s3c2410x_io_write_word(0x4d000004) = 0x004fc281
ERROR: s3c2410x_io_write_word(0x4d00000 = 0x0030ef0f
ERROR: s3c2410x_io_write_word(0x4d00000c) = 0x00000d1c
ERROR: s3c2410x_io_write_word(0x4d000010) = 0x00000b09
ERROR: s3c2410x_io_write_word(0x4d000014) = 0x187a0000
ERROR: s3c2410x_io_write_word(0x4d00001 = 0x187b2c00
ERROR: s3c2410x_io_write_word(0x4d00001c) = 0x000000f0
ERROR: s3c2410x_io_write_word(0x4d000060) = 0x00000000
ERROR: s3c2410x_io_write_word(0x4d000050) = 0x00000000
ERROR: s3c2410x_io_write_word(0x4d000000) = 0x00000679
ERROR: s3c2410x_io_write_word(0x4d000000) = 0x00000678
ERROR: s3c2410x_io_write_word(0x4d000004) = 0x004fc281
ERROR: s3c2410x_io_write_word(0x4d00000 = 0x0030ef0f
ERROR: s3c2410x_io_write_word(0x4d00000c) = 0x00000d1c
ERROR: s3c2410x_io_write_word(0x4d000010) = 0x00000b09
ERROR: s3c2410x_io_write_word(0x4d000014) = 0x187a0000
ERROR: s3c2410x_io_write_word(0x4d00001 = 0x187b2c00
ERROR: s3c2410x_io_write_word(0x4d00001c) = 0x000000f0
ERROR: s3c2410x_io_write_word(0x4d000000) = 0x00000679
Console: switching to colour frame buffer device 30x40
fb0: s3c2410fb frame buffer device
fb1: Virtual frame buffer device, using 1024K of video memory
S3C2410 RTC, (c) 2004 Simtec Electronics
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Cirrus Logic CS8900A driver for Linux (Modified for SMDK2410)
eth0: CS8900A rev D at 0xe0000300 irq=53, no eeprom , addr: 08: 0:3E:26:0A:5B
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
Generic platform RAM MTD, (c) 2004 Simtec Electronics
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2410-nand s3c2410-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
NAND_ECC_NONE selected by board driver. This is not recommended !!
Scanning device for bad blocks
Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00100000 : "bootloader"
mtd: Giving out device 0 to bootloader
ftl_cs: FTL header not found.
0x00100000-0x00400000 : "kernel"
mtd: Giving out device 1 to kernel
ftl_cs: FTL header not found.
0x00400000-0x01800000 : "root"
mtd: Giving out device 2 to root
ftl_cs: FTL header not found.
0x01800000-0x04000000 : "user"
mtd: Giving out device 3 to user
ftl_cs: FTL header not found.
aoe: aoe_init: AoE v22 initialised.
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
TCP bic registered
NET: Registered protocol family 1
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 4096KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 116K
Welcome to
_ _____ __ __ _ _
/ \ / __ \ / \_/ \ | | |_|
/ _ \ | | | | / /\ /\ \ | | _ ____ _ _ _ _
/ /_\ \ | |__| | / / \_/ \ \| | | | _ \| | | |\ \/ /
/ /___\ \ | |__\ \ | | | || |___ | | |_| | |_| |/ \
/_/ \_\| | \_\|_| |_||_____||_|_| |_|\____|\_/\_/
ARMLinux2.6.18 for SkyEye 1.2.7
***************************************************************
Linux2.6.18 boot on skyeye
By Jaye
***************************************************************
/bin/ash: can't access tty; job control turned off
/ #
不知道是什么问题，请指教。。。 |
|
IP卡
狗仔卡
发表于 2009-4-5 20:31:57
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2009-4-5 21:44:12