skyeye-1.2-RC8-3 不能调试 ucosii ?

smatter

Smatter@SMATTERSHI /ucosii4skyeye/samples/ucos_test

$ skyeye -e ucos_test.elf -c skyeye.conf

debugmode= 1, filename = skyeye.conf, server TCP port is 12345
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x41d8d0
SKYEYE: use arm7100 mmu ops
exec file "ucos_test.elf"'s format is elf32-little.
load section .text: addr = 0x01000000  size = 0x00007950.
load section .data: addr = 0x01008000  size = 0x0000206c.
not load section .bss: addr = 0x0100a06c  size = 0x000046f4 .
not load section .stab: addr = 0x00000000  size = 0x0000af68 .
not load section .stabstr: addr = 0x00000000  size = 0x00005751 .
not load section .comment: addr = 0x00000000  size = 0x00000260 .
start addr is set to 0x01000000 by exec file.


程序执行到这里 就不向下走了，而且不能输入任何的字符
第一次 学习这个的东西 请大家多多指导
---------------
winxp+cygwin
gcc v3.4.4
arm-linux-gcc gcc version 2.95.3 20010315 (release)

smatter

Smatter@SMATTERSHI /ucosii4skyeye/samples/ucos_test

$ make test

Hint: now you can "make test" to debug ucos_test.elf
skyeye ucos_test.elf
SKYEYE: If you have ELF kernel file, please use -e option to indicate your ELF f
ormat kernel filename
SKYEYE: If you only have kernel binary image, you should put the filename of ker
nel binary image in skyeye.conf file
Non-option argument ucos_test.elf
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x41d8d0
SKYEYE: use arm7100 mmu ops

make test走到这里 就不能运行了，也不能输入任何字符

smatter

在linux也是如此 是skyeye问题 还是 ucos问题啊？

ksh

Do you understand the hint in skyeye command in the following? You should read README in the skyeye source package carefully.

SKYEYE: If you have ELF kernel file, please use -e option to indicate your ELF format kernel filename