The hwclock command provides the interface to the hardware clock. If you are wanting to ensure the correct time then with a default Debian set up it is recommended that you use ntp instead if you can. When you reboot the system will save the current correct time to the hardware clock.
Anyhow, the --adjust option of the hwclock command checks information stored in the configuration file /etc/adjtime and makes an actual correction to the time stored in the hardware clock to account for the drift that it (the hwclock utility) has been monitoring. (Each time you set the hardware clock with the hwclock command the current time is compared to the previous time it was corrected to determine the amount of drift.) Thus, when setting the system clock from the hardware clock it is advisable to do the following:
# hwclock --adjust
# hwclock --hctosys
When updating the hardware clock from an accurate system clock do:
IP卡
狗仔卡
发表于 2006-10-20 22:57:07
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2006-10-27 08:30:01