FC3下安装NVIDIA显卡驱动的问题

喀秋莎

各位老师，我的电脑基本配置为Barton2500+,ASUS-A7N8X(NF2),GF4MX440-8x,DDR333 256x2.昨天安装了RedHat9.0,安装显卡驱动后把nv修改为nvidia,重新启动之后，到nvidia启动画面处黑屏。没办法今天又安装了FC3，并且升级了xorg，安装驱动后还是那样，到NVIDIA画面处就黑屏，显示器的灯也变成红色了。
驱动版本为6629。以前在我的sis735上安装都很正常，是不是NF2主板需要另外安装什么驱动啊？现在已经无法进入XWINDOWS了，请老师帮忙，谢谢。

吴文官

实在不行就不要装驱动了，不用驱动没什么感觉不好的。

我爱DDR

xorg的log有写什么吗？

贴出来给大家看看

喀秋莎

好，我明天回去弄好，发上来。

喀秋莎

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
         Identifier     "Default Layout"
       
         Screen      0  "Screen0" 0 0
       
         InputDevice    "Mouse0" "CorePointer"
       
         InputDevice    "Keyboard0" "CoreKeyboard"
       
         InputDevice    "DevInputMice" "AlwaysCore"
EndSection




Section "Files"


# RgbPath is the location of the RGB database.  Note, this is the name of the

# file minus the extension (like ".txt" or ".db").  There is normally

# no need to change the default.
# Multiple FontPath entries are allowed (they are

concatenated together)

# By default, Red Hat 6.0 and later now use a font server independent of

# the X server to render fonts.

        RgbPath      "/usr/X11R6/lib/X11/rgb"

        FontPath     "unix/:7100"

EndSection



Section "Module"



        Load  "extmod"

        Load  "fbdevhw"

        Load  "glx"

        Load  "record"

        Load  "freetype"

        Load  "type1"

EndSection



Section "InputDevice"


# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

#        Option        "Xleds"                "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#        Option        "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the

# lines below (which are the defaults).  For example, for a non-U.S.

# keyboard, you will probably want to use:

#        Option        "XkbModel"        "pc102"

# If you have a US Microsoft Natural keyboard, you can use:

#        Option        "XkbModel"        "microsoft"

#

# Then to change the language, change the Layout setting.

# For example, a german layout can be obtained with:

#        Option        "XkbLayout"        "de"

# or:

#        Option        "XkbLayout"        "de"

#        Option        "XkbVariant"        "nodeadkeys"

#

# If you'd like to switch the positions of your capslock and

# control keys, use:

#        Option        "XkbOptions"        "ctrl:swapcaps"

# Or if you just want both to be control, use:

#        Option        "XkbOptions"        "ctrl:nocaps"

#
                Identifier  "Keyboard0"

        Driver      "keyboard"

        Option            "XkbRules" "xfree86"
                Option            "XkbModel" "pc105"

        Option            "XkbLayout" "us"

EndSection



Section "InputDevice"

        Identifier  "Mouse0"

        Driver      "mouse"

        Option            "Protocol" "IMPS/2"

        Option            "Device" "/dev/psaux"

        Option            "ZAxisMapping" "4 5"

        Option            "Emulate3Buttons" "no"

EndSection



Section "InputDevice"


# If the normal CorePointer mouse is not a USB mouse then

# this input device can be used in AlwaysCore mode to let you

# also use USB mice at the same time.

        Identifier  "DevInputMice"

        Driver      "mouse"

        Option            "Protocol" "IMPS/2"

        Option            "Device" "/dev/input/mice"

        Option            "ZAxisMapping" "4 5"

        Option            "Emulate3Buttons" "no"

EndSection



Section "Monitor"

        Identifier   "Monitor0"
                VendorName   "Monitor Vendor"

        ModelName    "PHILIPS 107S"

        DisplaySize  310        230
                HorizSync    30.0 - 71.0

        VertRefresh  50.0 - 160.0

        Option            "dpms"

EndSection



Section "Device"

        Identifier  "Videocard0"

        Driver      "nvidia"
                VendorName  "Videocard vendor"

        BoardName   "NVIDIA GeForce 4 MX (generic)"

EndSection



Section "Screen"

        Identifier "Screen0"

        Device     "Videocard0"

        Monitor    "Monitor0"

        DefaultDepth     24

        SubSection "Display"

                Depth     24
                                Modes    "1024x768" "800x600"

"640x480"

        EndSubSection

EndSection



Section "DRI"
        Group        0

         Mode         0666

EndSection

喀秋莎

这是昨天我在RedHat9下面的XF86Config信息，不知道哪里有问题。Section "Module"中有Load "dbe"、Load "dri"被我删除了。