MagicLinux无法拨号问题(ESS ES56T-PI)

非常简单

最近帮一个朋友装机时遇到以下拨号问题：

内置猫，PCI卡，ESS ES56T-PI
在安装MagicLinux后没有认到此设备，从网上找了相关的LINUX驱动，在SHELL提示下进行安装，感觉是与系统内核不匹配造成无法正常驱动
在安装完成后，在/dev下多了一个essmodem文件，并且将modem做为essmodem的链接，在图型界面下找到MODEM拨号设置，选择MODEM设备位置就是/dev/modem，我认为这就可以了，但系统总是提示找不到相应的设备

不知道是我那一步做的不对，是不是驱动有问题，希望能够得到指点，谢了先

如果我将他的MODEM安装好了，基本上就已经将他的生活中的操作系统已经转型了，希望能够对我这种扩大LIUNX应用群体的行为多给些支持


附：驱动相关信息(Essmodem.zip)350,535 字节

其中运行./Essinst


#!/bin/sh

#This function is modified from the Script implemented by Linmodem.org
fixScript()
{
MI=/tmp/modinfo
DI=/tmp/depinfo

#new kernel version modinfo section
echo -ne "kernel_version="`uname -r`"\0" > $MI

#build the objcopy command
CMD="objcopy"
#for i in `depmod -e $1 | grep -vE "^$1:"` ; do
depmod -e $1 2>$DI
AWKSTR=\$2
for i in `awk "{print $AWKSTR}" $DI | grep _R` ; do
echo doing $i
i1=`echo $i | awk '{
  gsub(/_R[0-9a-fA-F]+/,"");
  printf("%s", $1);
}'`
echo "i1=" $i1
echo " trunc=\"$i1\""
searchstr=$i1"_R"
echo "searchstr=" $searchstr
new=`cat /proc/ksyms | grep $searchstr | awk "{print $AWKSTR}"`
echo " new=$new"
CMD="$CMD --redefine-sym=$i=$new"
done

#replace the modinfo section with the new one
CMD="$CMD --remove-section=.modinfo --add-section=.modinfo=$MI"
CMD="$CMD $*"

#run the command
echo "CMD:" $CMD
$CMD

#remove the section file
rm -f $MI
rm -f $DI

}

cat <<SHOW
ESS MODEM INSTALLATION PROGRAM
        written by Joe <[email protected]>

NOTE:
This program need the root privilege.
Check to be sure that you have it.
SHOW

echo "Now will install driver for ES56-PI, ES56V-PI, ES56T-PI, or ES56V-I ."
echo "Continue?(y/n)"
read choice1
case $choice1 in
        y|Y)
        echo "Is your modem based on PCI or ISA?(p/i)"
        read interface
        if [ $interface = "i" -o $interface = "I" ] ; then
                ESSCOM="es56VI.o"
        elif [ $interface = "p" -o $interface = "P" ] ; then
                ESSCOM="es56TPI.o"
        else
                echo "Unrecognized interface!"
                exit 1;
        fi
        echo "Test for system enviroment..."
        echo "This driver only supports kernel version 2.2.12-20(or higher)"
        echo "And your kernel version is: "`uname -r`
        echo "Continue?(y/n)"
        read choice2
        if [ $choice2 = "n" -o $choice2 = "N" ]; then
                echo "Exiting script..."
                exit 1;
        elif [ $choice2 != "y" -a $choice2 != "Y" ] ; then
                echo "Unrecognizeable input!"
                exit 1;
        else
                echo "Checking module dependence..."
        fi
        rmmod esscom >NULL
        insmod $ESSCOM
        if ! test $? -eq 0 ; then
                echo "Adding patch..."
                fixScript $ESSCOM patched_esscom.o
                echo "Patch added."
                cp -f patched_esscom.o /lib/modules/`uname -r`/misc/esscom.o
                insmod esscom
                rm -f patched_esscom.o
        else       
                echo "Test passed..."
                if test $ESSCOM = "es56TPI.o" ; then
                        rmmod es56TPI >NULL
                else
                        rmmod es56VI >NULL
                fi
                cp -f $ESSCOM /lib/modules/`uname -r`/misc/esscom.o
                insmod esscom
        fi
cat <<JOE >loadmod
rmmod esscom >NULL
insmod esscom
JOE

cat <<JOE >freemod
rmmod esscom >NULL
JOE

cat <<JOE >Essuninst
rmmod esscom
rm -f /dev/essmodem
y
rm -f /dev/modem
y
rm -f /lib/modules/`uname -r`/misc/esscom.o
y
JOE

cat <<JOE >readme.txt
Installation over.
Check the command 'lsmod' to see whether esscom has been successfully loaded.
If so,Congratulatoins!
And you can now use minicom and ppp to configure your network!

Later:
Run './loadmod' to load esscom as a module.
And run './freemod' to unload the module esscom.
You can also run './Essuninst' to uninstall the driver.

Please mail to <[email protected]> if you encount any problem.
Enjoy it!

                                                        Joe Hawk
JOE

        chmod 755 loadmod
        chmod 755 freemod
        chmod 755 Essuninst
        rm /dev/essmodem >NULL
        mknod /dev/essmodem c 127 1
        rm /dev/modem >NULL
        ln -s /dev/essmodem /dev/modem
        lsmod
        echo
        echo "Installation over."
        echo "Please read the readme.txt in detail."
        exit 1
        ;;
        n|N)
        echo "Exiting script..."
        exit 1
        ;;
        *)
        echo "Unrecognizeable input!"
        ;;
esac

VirusCamp

ESS ES56T-PI 这个倒霉的软猫,我以前也有,从来没在linux用成过.

我记得是有一个驱动的,好像很老,应该是2.4的,可能不支持2.6.

现在不知道有新的没有.

非常简单

仁兄们，还有救吗？？ :-( 大家多费心了