还是BCM57xx网卡的问题，redhat el 3环境

samfisher

我在hp compaq dc7600 ultra-slim desktop上面安装redhat es3，网卡是
BCM5752的千兆网卡，内核2.4.21-4.ELsmp不认识，于是从broadcom网站上download了最新的linux驱动程序，照着步骤安装了，启动的dmesg里面:

divert: allocating divert_blk for eth0
eth0: Broadcom BCM5752 1000Base-T PCI Express found at mem e0500000, IRQ 16, node addr 00132104761c
eth0: Broadcom BCM5752 Integrated Copper transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON
divert: freeing divert_blk for eth0
divert: allocating divert_blk for eth0
eth0: Broadcom BCM5752 1000Base-T PCI Express found at mem e0500000, IRQ 16, node addr 00132104761c
eth0: Broadcom BCM5752 Integrated Copper transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON
eth0: Using PCI INTX interrupt
<b>bcm5700: eth0 NIC Link is DOWN</b>
divert: freeing divert_blk for eth0

网卡找到了，但是就是没法连通网络，同样的一台机器装fedora core 4可以自动的安装上Tigon3的驱动，显示出来的网卡名字和我的一样bcm5752。网线，网卡硬件绝对都是好的（因为我在windows下面是好的）

dhcp是无法取到ip地址，设定为静态的ip也ping不到其他的机器，请教高人，应该从哪里开始诊断啊

vortexdog

我也遇到了同样的问题，不过是在IBM8131机器上。