SPB152_lnx86.Base在fc4上安装不上?

PXE2 · 发表于 2005-8-26 17:58:53

这是个专业的PCB软件。。。
[cqs@localhost CDROM1]$ ./SETUP.SH

Copyright 1985-1999 by Cadence Design Systems Inc.

LICENSED SOFTWARE - REVERSE ASSEMBLY, REVERSE COMPILATION AND
REVERSE ENGINEERING PROHIBITED. The information contained in
this package is the proprietary property of Cadence Design Systems,
Inc., or its licensors, and may only be used in accordance with
the Cadence Design Systems license agreement under which this
package is provided.

Restricted Rights Notice to Government Users

Use duplication or disclosure by the Government is subject to
the restrictions as set forth in subparagraphs (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013. Unpublished - all rights reserved under the
copyright laws of the United States.

Cadence Design Systems, Inc.
555 River Oaks Parkway
San Jose, California 95134 USA

Located CDROM at /home/cqs/pcb/SPB152_lnx86.Base/CDROM1
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c
/opt/SPB152

Directory /opt/SPB152 does not exist. Create? [y/n]: \c
y

Creating directory /opt/SPB152
\c

Setting up softload for lnx86 in /opt/SPB152
\c

The following tar errors were detected:
\c
/bin/tar: -b1：归档中找不到
/bin/tar: 由于前面延迟的错误而退出
/bin/tar: -b1：归档中找不到
/bin/tar: 由于前面延迟的错误而退出

Could not set up SoftLoad in /opt/SPB152\c

You must have write permissions to install directory \c
and all its subdirectories
and atleast 10 MB available disk \c
space in install directory.
\c

Specify path of install directory \c
[OR type [RETURN] to exit]: \c

PXE2 · 发表于 2005-9-5 19:45:40

我的bashrc如下
export CDS_INST_DIR=/opt/spb
export CDS_ROOT=/opt/IC5141
export CDS_INSTALL_DIR=$CDS_INST_DIR/tools/dfII:$CDS_ROOT/tools/dfII
export CDS_LIC_FILE=$CDS_INST_DIR/share/cadence.license:$CDS_ROOT/share/license/license.dat
export CDS_DIR=$CDS_INST_DIR:$CDS_ROOT
export CONCEPT_INST_DIR=$CDS_INST_DIR
export CDS_SITE=$CDS_INST_DIR/share/local/
export LD_LIBRARY_PATH=$CDS_INST_DIR/tools/lib:$CDS_ROOT/tools/lib
export CDSDOC_PROJECT=$CDS_INST_DIR/doc:$CDS_ROOT/doc
export PATH=$CDS_INST_DIR/tools/bin:$CDS_INST_DIR/tools/pcb/bin:$CDS_INST_DIR/tools/fet/bin:$CDS_INST_DIR/tools/dfII/bin:$CDS_ROOT/tools/bin:$CDS_ROOT/tools/dfII/bin:$CDS_ROOT/tools/spectre/bin:$PATH
export CDS_Netlisting_Node Analog
export LD_ASSUME_KERNEL=2.4.1
#allegro &allegro_design_entry_HDL &projmgr &

并且 libdb.so.3也有的

robinswan · 发表于 2005-9-14 02:53:47

[quote:ce3f4ecc42="PXE2"]我的bashrc如下
# Cadence PSD environment

CDS_INST_DIR=/opt/psd
CDS_LIC_FILE=$CDS_INST_DIR/share/cadence.license
CDS_DIR=$CDS_INST_DIR
CONCEPT_INST_DIR=$CDS_DIR
CDS_SITE=$CDS_DIR/share/local/

LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$CONCEPT_INST_DIR/tools/lib
CDSDOC_PROJECT=/CDS_INST_DIR/doc

PATH=$PATH:$CONCEPT_INST_DIR/tools/bin
PATH=$PATH:$CONCEPT_INST_DIR/tools/pcb/bin
PATH=$PATH:$CONCEPT_INST_DIR/tools/fet/bin

export CONCEPT_INST_DIR
export CDSDOC_PROJECT
export CDS_SITE
export CDS_LIC_FILE
export CDS_INST_DIR
export LD_LIBRARY_PATH
export PATH

并且 libdb.so.3也有的[/quote]

楼上的老兄，是否可以给个 license 啊？
QQ ： 15808390
email: [email protected]

PXE2 · 发表于 2005-10-9 12:02:35

知道了，是fc4的tar的问题。

xjx19 · 发表于 2006-2-27 08:21:19

[quote:0c0a82a859="PXE2"]知道了，是fc4的tar的问题。[/quote]
拜托楼主能不能讲的详细点，小弟现在也是卡在这里

PXE2 · 发表于 2006-2-27 10:05:54

就是要装个低板本的tar或者是在别的linux下装好了tar 整个目录过来就ok.

iamathinker · 发表于 2006-4-4 15:03:59

楼上几位兄弟可否提供一个下载地址给我啊。谢谢

PXE2 · 发表于 2006-4-7 10:32:43

北京来copy

voodoomaster · 发表于 2006-7-6 18:07:50

我用的fc5，也遇到和楼主一样的问题，说是tar有问题。先搞个tar试试，实在不想用fc3了，前天才从fc3升级到fc5

PXE2 · 发表于 2006-7-7 12:31:25

下载地址
Base_SPB155.md5 (418 Bytes)
Base_SPB155_license.lic (4.31 KB)
Base_SPB155_lnx86_1of5.tar (367.3 MB)
Base_SPB155_lnx86_2of5.tar (533.39 MB)
Base_SPB155_lnx86_3of5.tar (536.21 MB)
Base_SPB155_lnx86_4of5.tar (530.38 MB)
Base_SPB155_lnx86_5of5.tar (18.08 MB)

voodoomaster · 发表于 2006-7-7 15:17:26

搞了半天，还是不能在fc5下面安装，今天一怒之下重新装了fc3，终于可以正常安装了，现在先看看pxe2的环境变量如何设定，然后再运行一下试试。

		自动登录	找回密码
密码			注册