裸体跪地求救！急急！

tomko

我裸体跪地求救！请各位大侠出手相救。
公司总部IT人员来我司用Novell Linux做了服务器。其它电脑通过代理192.168.0.1：3128上网，我是网管可从没用过LINUX，经理要看各电脑的上网记录，我不知道LINUX上那个文件记录了通上代理上网电脑的记录！在此向各位大侠诚心求救！

atfa

用的什么代理服务器软件

还是把这个电脑作了一个软路由？

jiaoyantuzi

应该在某个目录下面,查查代理服务用什么软件做的,

tomko

我是个菜鸟的菜鸟！不知道啊！只知道要增加上网的电脑的话要编辑这个：
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#

# option definitions common to all supported networks...
option domain-name "beyonics.com";
option domain-name-servers 218.2.135.1, 61.147.37.1;

default-lease-time 600;
max-lease-time 7200;

ddns-update-style none; ddns-updates off;
authoritative;
log-facility local7;
subnet 192.168.0.0 netmask 255.255.255.0 {
}

# This is a very basic subnet declaration.

subnet 192.168.0.0 netmask 255.255.255.0 {
  range 192.168.0.101 192.168.0.200;
  option routers 192.168.0.1;
}

# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

host passacaglia {
  hardware ethernet 0:0:c0:5d:bd:95;
  server-name "toccata.fugue.com";
}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.

#Range of Internet enabled IP is 192.168.0.20 - 192.168.0.80 assigned
#Start from 192.168.0.21
#All others are not allowed through this proxy server
host MIS-NB4 {
  hardware ethernet 00:0D:60:7E:8C:17;
  fixed-address 192.168.0.21;
}
#
host KELLY {
  hardware ethernet 00:0D:87:D6:3B:E7;
  fixed-address 192.168.0.30;
}
#
host JERRY {
  hardware ethernet 00:0A:EB:8E:0C:03;
  fixed-address 192.168.0.31;
}
#
host PAULINE {
  hardware ethernet 52:54:AB:34:A4:18;
  fixed-address 192.168.0.32;
}
#
host LIMIN {
  hardware ethernet 52:54:AB:3B:1A:F4;
  fixed-address 192.168.0.33;
}
#
host SIM {
  hardware ethernet 00:10:5C:F5:9E:5F;
  fixed-address 192.168.0.34;
}
#
host Yongping {
  hardware ethernet 00:D0:F8:3C:CF:67;
  fixed-address 192.168.0.35;
}
#
host CAIWV2 {
  hardware ethernet 00:05:5D:02:F9:8D;
  fixed-address 192.168.0.36;
}
#
host CAIWV3 {
  hardware ethernet 00:01:01:76:19:50;
  fixed-address 192.168.0.37;
}
#
host BE1 {
  hardware ethernet 00:11:11:1B:79:49;
  fixed-address 192.168.0.38;
}
#
host TPY {
  hardware ethernet 00:40:05:14:7C:08;
  fixed-address 192.168.0.39;
}
#
host btl-lautc {
  hardware ethernet 00:08:74:E6:AA:5B;
  fixed-address 192.168.0.40;
}
#
host IBM  {
  hardware ethernet 00:0D:60:CB:09:0B;
  fixed-address 192.168.0.41;
}
#
host HUFEI  {
  hardware ethernet 00:D0:F8:01:BD:46;
  fixed-address 192.168.0.42;
}
#
host LEICHAO  {
  hardware ethernet 52:54:AB:3B:07:F7;
  fixed-address 192.168.0.43;
}
#
host Tc  {
  hardware ethernet 00:12:3F:03:D3:1C;
  fixed-address 192.168.0.45;
}
#
host RIMAN  {
  hardware ethernet 00:10:4B:E3:72:ED;
  fixed-address 192.168.0.44;
}
#
host LUDAWENG  {
  hardware ethernet 00:E0:4C:B0:04:FB;
  fixed-address 192.168.0.22;
}
#
host WANGSHUXIN  {
  hardware ethernet 00:11:09:B1:EE:47;
  fixed-address 192.168.0.23;
}
#
host YEJIAN  {
  hardware ethernet 00:E0:4C:E7:C8:3B;
  fixed-address 192.168.0.24;
}

#
#
#
#
#
######END#######

tomko

请教！在线等啊！高手出手吧！

Miliardo

虽然这么说……
从那个端口看……
应该是Squid吧……

tomko

Squid？不明白！请大侠说具体点！万分谢意敬上！

jiaoyantuzi

这个文件是编辑DHCP服务用的,用于客户端自动获取IP

最后de童话

请楼主换个标题，我们这个论坛......