|
|
发表于 2005-3-9 20:37:28
|
显示全部楼层
太长，看得眼晕，我贴一下我的，相对原始的配置文件有改变的地方我用红字标出
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<!-- /etc/fonts/fonts.conf file to configure system font access -->
<fontconfig>
<!--
DO NOT EDIT THIS FILE.
IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.
LOCAL CHANGES BELONG IN 'local.conf'.
The intent of this standard configuration file is to be adequate for
most environments. If you have a reasonably normal environment and
have found problems with this configuration, they are probably
things that others will also want fixed. Please submit any
problems to the fontconfig bugzilla system located at fontconfig.org
Note that the normal 'make install' procedure for fontconfig is to
replace any existing fonts.conf file with the new version. Place
any local customizations in local.conf which this file references.
Keith Packard
-->
<!-- Font directory list configured on Fri Dec 3 21:51:08 CST 2004 -->
<dir>/usr/local/share/fonts</dir>
<dir>/usr/share/fonts</dir>
<dir>/usr/X11R6/lib/X11/fonts</dir>
<dir>/usr/lib/X11/fonts/misc</dir>
<dir>/usr/lib/X11/fonts/100dpi</dir>
<dir>/usr/lib/X11/fonts/75dpi</dir>
<dir>/usr/lib/X11/fonts/Type1</dir>
<dir>/usr/lib/X11/fonts/Speedo</dir>
<dir>~/.fonts</dir>
<!--
Accept deprecated 'mono' alias, replacing it with 'monospace'
-->
<match target="pattern">
<test qual="any" name="family">
<string>mono</string>
</test>
<edit name="family" mode="assign">
<string>monospace</string>
</edit>
</match>
<!--
Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'
-->
<match target="pattern">
<test qual="any" name="family">
<string>sans serif</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>
<!--
Accept deprecated 'sans' alias, replacing it with 'sans-serif'
-->
<match target="pattern">
<test qual="any" name="family">
<string>sans</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>
<!--
Mark common families with their generics so we'll get
something reasonable
-->
<!--
Serif faces
-->
<alias>
<family>Vera Sans YuanTi</family>
<family>Bitstream Vera Serif</family>
<family>Times</family>
<family>Times New Roman</family>
<family>Nimbus Roman No9 L</family>
<family>Luxi Serif</family>
<family>Kochi Mincho</family>
<family>AR PL SungtiL GB</family>
<family>AR PL Mingti2L Big5</family>
<family>Baekmuk Batang</family>
<family>FreeSerif</family>
<default><family>serif</family></default>
</alias>
<!--
Sans-serif faces
-->
<alias>
<family>Vera Sans YuanTi</family>
<family>Bitstream Vera Sans</family>
<family>Helvetica</family>
<family>Arial</family>
<family>Verdana</family>
<family>Nimbus Sans L</family>
<family>Luxi Sans</family>
<family>Kochi Gothic</family>
<family>AR PL KaitiM GB</family>
<family>AR PL KaitiM Big5</family>
<family>Baekmuk Dotum</family>
<family>SimSun</family>
<family>FreeSans</family>
<default><family>sans-serif</family></default>
</alias>
<!--
Monospace faces
-->
<alias>
<family>Vera Sans YuanTi Mono</family>
<family>Bitstream Vera Sans Mono</family>
<family>Courier</family>
<family>Courier New</family>
<family>Andale Mono</family>
<family>Luxi Mono</family>
<family>Nimbus Mono L</family>
<family>NSimSun</family>
<family>FreeMono</family>
<default><family>monospace</family></default>
</alias>
<!--
If the font still has no generic name, add sans-serif
-->
<match target="pattern">
<test qual="all" name="family" compare="not_eq">
<string>sans-serif</string>
</test>
<test qual="all" name="family" compare="not_eq">
<string>serif</string>
</test>
<test qual="all" name="family" compare="not_eq">
<string>monospace</string>
</test>
<edit name="family" mode="append_last">
<string>sans-serif</string>
</edit>
</match>
<!--
Some Asian fonts misadvertise themselves as monospaced when
in fact they are dual-spaced (half and full). This makes
FreeType very confused as it forces all widths to match.
Undo this magic by disabling the width forcing code -->
<match target="font">
<test name="family"><string>GulimChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<match target="font">
<test name="family"><string>DotumChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<match target="font">
<test name="family"><string>BatangChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<match target="font">
<test name="family"><string>GungsuhChe</string></test>
<edit name="globaladvance"><bool>false</bool></edit>
</match>
<!--
The Bitstream Vera fonts have GASP entries suggesting that hinting be
disabled below 8 ppem, but FreeType ignores those, preferring to use
the data found in the instructed hints. The initial Vera release
didn't include the right instructions in the 'prep' table. Fix this
by disabling hinting manually at smaller sizes (< 8ppem)
-->
<match target="font">
<test name="family">
<string>Bitstream Vera Sans</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test name="family">
<string>Bitstream Vera Serif</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test name="family">
<string>Bitstream Vera Sans Mono</string>
</test>
<test name="pixelsize" compare="less">
<double>7.5</double>
</test>
<edit name="hinting">
<bool>false</bool>
</edit>
</match>
<!--
Load per-user customization file
-->
<include ignore_missing="yes">~/.fonts.conf</include>
<!--
Load local system customization file
-->
<include ignore_missing="yes">local.conf</include>
<!--
Alias well known Type1 font names to metric equivalent TrueType fonts
-->
<alias>
<family>Times</family>
<accept><family>Times New Roman</family></accept>
</alias>
<alias>
<family>Helvetica</family>
<accept><family>Arial</family></accept>
</alias>
<alias>
<family>Courier</family>
<accept><family>Courier New</family></accept>
</alias>
<!--
Provide required aliases for standard names
-->
<alias>
<family>serif</family>
<prefer>
<family>Vera Sans YuanTi</family>
<family>Bitstream Vera Serif</family>
<family>Times New Roman</family>
<family>Nimbus Roman No9 L</family>
<family>Luxi Serif</family>
<family>Times</family>
<family>Frank Ruehl</family>
<family>Kochi Mincho</family>
<family>AR PL SungtiL GB</family>
<family>AR PL Mingti2L Big5</family>
<family>Baekmuk Batang</family>
<family>FreeSerif</family>
</prefer>
</alias>
<alias>
<family>sans-serif</family>
<prefer>
<family>Vera Sans YuanTi</family>
<family>Bitstream Vera Sans</family>
<family>Verdana</family>
<family>Nimbus Sans L</family>
<family>Luxi Sans</family>
<family>Arial</family>
<family>Helvetica</family>
<family>Nachlieli</family>
<family>Kochi Gothic</family>
<family>AR PL KaitiM GB</family>
<family>AR PL KaitiM Big5</family>
<family>Baekmuk Dotum</family>
<family>SimSun</family>
<family>FreeSans</family>
</prefer>
</alias>
<alias>
<family>monospace</family>
<prefer>
<family>Vera Sans YuanTi Mono</family>
<family>Bitstream Vera Sans Mono</family>
<family>Andale Mono</family>
<family>Courier New</family>
<family>Luxi Mono</family>
<family>Nimbus Mono L</family>
<family>Miriam Mono</family>
<family>Kochi Gothic</family>
<family>AR PL KaitiM GB</family>
<family>Baekmuk Dotum</family>
<family>FreeMono</family>
</prefer>
</alias>
<!--
Artificial oblique for fonts without an italic or oblique version
-->
<match target="font">
<!-- check to see if the font is roman -->
<test name="slant">
<const>roman</const>
</test>
<!-- check to see if the pattern requested non-roman -->
<test target="pattern" name="slant" compare="not_eq">
<const>roman</const>
</test>
<!-- multiply the matrix to slant the font -->
<edit name="matrix" mode="assign">
<times>
<name>matrix</name>
<matrix><double>1</double><double>0.2</double>
<double>0</double><double>1</double>
</matrix>
</times>
</edit>
<!-- pretend the font is oblique now -->
<edit name="slant" mode="assign">
<const>oblique</const>
</edit>
</match>
<config>
<!--
These are the default Unicode chars that are expected to be blank
in fonts. All other blank chars are assumed to be broken and
won't appear in the resulting charsets
-->
<blank>
<int>0x0020</int> <!-- SPACE -->
<int>0x00a0</int> <!-- NO-BREAK SPACE -->
<int>0x00ad</int> <!-- SOFT HYPHEN -->
<int>0x115f</int> <!-- HANGUL CHOSEONG FILLER -->
<int>0x1160</int> <!-- HANGUL JUNGSEONG FILLER -->
<int>0x1680</int> <!-- OGHAM SPACE MARK -->
<int>0x2000</int> <!-- EN QUAD -->
<int>0x2001</int> <!-- EM QUAD -->
<int>0x2002</int> <!-- EN SPACE -->
<int>0x2003</int> <!-- EM SPACE -->
<int>0x2004</int> <!-- THREE-PER-EM SPACE -->
<int>0x2005</int> <!-- FOUR-PER-EM SPACE -->
<int>0x2006</int> <!-- SIX-PER-EM SPACE -->
<int>0x2007</int> <!-- FIGURE SPACE -->
<int>0x2008</int> <!-- PUNCTUATION SPACE -->
<int>0x2009</int> <!-- THIN SPACE -->
<int>0x200a</int> <!-- HAIR SPACE -->
<int>0x200b</int> <!-- ZERO WIDTH SPACE -->
<int>0x200c</int> <!-- ZERO WIDTH NON-JOINER -->
<int>0x200d</int> <!-- ZERO WIDTH JOINER -->
<int>0x200e</int> <!-- LEFT-TO-RIGHT MARK -->
<int>0x200f</int> <!-- RIGHT-TO-LEFT MARK -->
<int>0x2028</int> <!-- LINE SEPARATOR -->
<int>0x2029</int> <!-- PARAGRAPH SEPARATOR -->
<int>0x202a</int> <!-- LEFT-TO-RIGHT EMBEDDING -->
<int>0x202b</int> <!-- RIGHT-TO-LEFT EMBEDDING -->
<int>0x202c</int> <!-- POP DIRECTIONAL FORMATTING -->
<int>0x202d</int> <!-- LEFT-TO-RIGHT OVERRIDE -->
<int>0x202e</int> <!-- RIGHT-TO-LEFT OVERRIDE -->
<int>0x202f</int> <!-- NARROW NO-BREAK SPACE -->
<int>0x205f</int> <!-- MEDIUM MATHEMATICAL SPACE -->
<int>0x2060</int> <!-- WORD JOINER -->
<int>0x2061</int> <!-- FUNCTION APPLICATION -->
<int>0x2062</int> <!-- INVISIBLE TIMES -->
<int>0x2063</int> <!-- INVISIBLE SEPARATOR -->
<int>0x206A</int> <!-- INHIBIT SYMMETRIC SWAPPING -->
<int>0x206B</int> <!-- ACTIVATE SYMMETRIC SWAPPING -->
<int>0x206C</int> <!-- INHIBIT ARABIC FORM SHAPING -->
<int>0x206D</int> <!-- ACTIVATE ARABIC FORM SHAPING -->
<int>0x206E</int> <!-- NATIONAL DIGIT SHAPES -->
<int>0x206F</int> <!-- NOMINAL DIGIT SHAPES -->
<int>0x3000</int> <!-- IDEOGRAPHIC SPACE -->
<int>0x3164</int> <!-- HANGUL FILLER -->
<int>0xfeff</int> <!-- ZERO WIDTH NO-BREAK SPACE -->
<int>0xffa0</int> <!-- HALFWIDTH HANGUL FILLER -->
<int>0xfff9</int> <!-- INTERLINEAR ANNOTATION ANCHOR -->
<int>0xfffa</int> <!-- INTERLINEAR ANNOTATION SEPARATOR -->
<int>0xfffb</int> <!-- INTERLINEAR ANNOTATION TERMINATOR -->
</blank>
<!--
Rescan configuration every 30 seconds when FcFontSetList is called
-->
<rescan>
<int>30</int>
</rescan>
</config>
<match target="font">
<test target="pattern" name="lang" compare="contains">
<string>zh-tw</string>
<string>zh-cn</string>
<string>ja</string>
<string>ko</string>
</test>
<edit name="spacing">
<const>proportional</const>
</edit>
<edit name="globaladvance">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test target="pattern" name="lang" compare="contains">
<string>zh-tw</string>
<string>zh-cn</string>
<string>ja</string>
<string>ko</string>
</test>
<test name="spacing" compare="eq">
<const>mono</const>
</test>
<edit name="globaladvance" mode="assign">
<bool>false</bool>
</edit>
</match>
<match target="font">
<edit name="antialias" mode="assign"><bool>true</bool></edit>
<edit name="hinting" mode="assign"><bool>false</bool></edit>
<edit name="autohint" mode="assign"><bool>false</bool></edit>
</match>
<match target="font">
<test compare="more_eq" name="pixelsize" qual="any" ><double>12</double></test>
<test compare="less_eq" name="pixelsize" qual="any" ><double>16</double></test>
<edit name="antialias" mode="assign"><bool>false</bool></edit>
<edit name="hinting" mode="assign"><bool>true</bool></edit>
<edit name="autohint" mode="assign"><bool>false</bool></edit>
<edit name="hintstyle" mode="assign"><const>hintfull</const></edit>
</match>
</fontconfig>
然后在字体设置里选Vera Sans YuanTi
结果就应该是所有字体在12px~16px的时候都用点阵和hinting（结果就是win的那种清晰细腻的效果），其他字号时用AA（就是像mac那种粗粗黑黑的效果） |
|
IP卡
狗仔卡
显身卡