QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 959|回复: 3

编译完UCLINUX,运行又出错了,哎!

[复制链接]
发表于 2005-1-11 10:30:16 | 显示全部楼层 |阅读模式
# skyeye linux
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
***************************************************************
************   SkyEye is Simulator based on GDB   *************
***************************************************************
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(SkyEye) target sim
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x813cfe0
nic[0] info: state=1, ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
nic_init_begin
tapif_init begin
tapif_init: fd -1
tapif_initpen: 没有那个设备
-----------------------------------------------------------
NOTICE: you should be root at first !!!
NOTICE: you should inmod linux kernel net driver tun.o!!!
NOTICE: if you don't make device node, you should do commands:
NOTICE:    mkdir /dev/net; mknod /dev/net/tun c 10 200
NOTICE: now the net simulation function can not support!!!
NOTICE: Please read SkyEye.README and try again!!!
-----------------------------------------------------------
发表于 2005-1-11 11:52:54 | 显示全部楼层
运行如下命令:
mkdir /dev/net; mknod /dev/net/tun c 10 200
另外,用root用户运行skyeye.
回复

使用道具 举报

 楼主| 发表于 2005-1-11 19:06:41 | 显示全部楼层
运行命令后说已经在DEV/NET/下已经有TUN这个目录了呀,我是用ROOT登录的
回复

使用道具 举报

 楼主| 发表于 2005-1-14 10:20:30 | 显示全部楼层
请斑竹指点
UCLINUX是20040408的版本
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-5 18:45 , Processed in 0.057426 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表