M大人，我也碰到了cdrecord的灵异事件了，呵呵

cutsky

我用cdrecord刻盘，显示一切ok，但是盘上面什么都没有。我用的命令是： cdrecord dev=ATA:1,1,0 speed=24 -tao -v hiweed055-livecd-w445.iso
屏幕显示：
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <[email protected]>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATA:1,1,0'
devname: 'ATA'
scsibus: 1 target: 1 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c        1.80 04/03/08 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: -1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'CD-RW   '
Identifikation : 'SMART CLONE24   '
Revision       : '5SW2'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1966272 = 1920 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   237 MB
Total size:      273 MB (27:02.85) = 121714 sectors
Lout start:      273 MB (27:04/64) = 121714 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 238132
Starting to write CD/DVD at speed  24.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01:  237 of  237 MB written (fifo 100%) [buf  99%]  24.3x.
Track 01: Total bytes read/written: 249266176/249266176 (121712 sectors).
Writing  time:   99.901s
Average write speed  18.2x.
Min drive buffer fill was 61%
Fixating...
Fixating time:   21.883s
cdrecord: fifo had 3927 puts and 3927 gets.
cdrecord: fifo was 0 times empty and 3332 times full, min fill was 81%.
不知那位大人可指点迷津，不胜感激。

BOoRFGOnZ

说实在的 俺还没有自己刻过盘呢  

MichaelBibby

俺也不知该如何解决 -- 主要是因为自己没有这个条件测试，抱歉

另，你的标题把我吓一跳，下次可别再写什么“M大人”了

BOoRFGOnZ

bigcat00

算了吧，别直接用cdrecorder刻盘了，下载安装个k3b吧，我也用cdrecorder刻过盘，好像刻出来的不是iso9660格式的。

dannycat

k3b 只是个图形前端，最终还是调用的 cdrecord。 没有 cdrecord 它是不能干活滴~~

还是先检验一下 iso 的 md5sum，没错的话改个刻录模式、降低刻录速度等等方式试一下。

偶只用 cdrecord， 还没有遇到过刻不出东东的时候。

cutsky

谢谢诸位的回答!我的盘在windows下面还是可以读的,偏偏在自己的linux下啥都没有,呵呵
难道说是我mount参数不对?我用的是mount -o loop xxx.iso /mnt/cdrom1

dannycat

这跟你刻的盘有啥关系？ 你这是 mount 镜像文件啊？ 然后没有错误， ls /mnt/cdrom1 就啥都没有？

cutsky

不好意思是我的笔误，我本想说我 用mount /dev/cdrom  /mnt/cdrom1的，真不好意思。