求救!--Redhat9.0显示分辨率问题!急啊!

hackerfang

我的电脑是sis650的显示卡(精英移动PC),安装了redhat9.0,现在问题来了,显示分辨率为800*600,怎么调也调不到1024*768.请教大虾帮助啊!

flyeagle00s1

你的显示器调的对吗？

wcf

大概在/usr/local/bih/目录下有一系列命令‘redhat-config-XXX',其中就有一个是调整分辨率的。

hackerfang

下拉列表里有1024*768这一项，选择了之后机器要求注销一下，但是我注销过后还是不行的啊。现在这么大的图标和字体，难看的呢。急！

wcf

我说错了，在/sbin目录下，运行redhat-config-xfree86,再按你的要求配置一下，确定-注销即可!

Joker_cn

先打开/etc/X11/XF86Config看看有没有支持1024*768的模式
没有按照它的样子加上去
退出重新启动一次x
用cltrl+alt+"+"或者"-"切换就ok了
注意是小键盘上的+,-

Joker_cn

先打开/etc/X11/XF86Config看看有没有支持1024*768的模式
没有按照它的样子加上去
退出重新启动一次x
用cltrl+alt+"+"或者"-"切换就ok了
注意是小键盘上的+,-

Leaves

hackerfang, 兄, 我的是华硕的本本,也是SIS650,显示驱动是VESA,进系统时,
会有花屏,我考! 你有吗?

hackerfang

进去的时候会有花屏一闪而过，我的也是，但是不影响后面的使用！

barble

VESA is generic driver, it displays in 800*600 resolution. Do you change the video driver after finished Linux installation? If so, you should download new driver to install and modify your XF86Config('Device Setion': Change 'Driver' item). I had the same problem, but my Video card is intel 845, and the monitor is Dell E151FP, now it works well.

clapton

[quote:3857799577="barble"]VESA is generic driver, it displays in 800*600 resolution. Do you change the video driver after finished Linux installation? If so, you should download new driver to install and modify your XF86Config('Device Setion': Change 'Driver' item). I had the same problem, but my Video card is intel 845, and the monitor is Dell E151FP, now it works well.[/quote]


how to change the video driver?
do i need to download?
my video card is also inter 845

Joker_cn

我也是sis650的用1024*678没问题
x启动的时候有花屏，不过马上就好了

gugong

我用集成的 sis 630 ，是 LCD 显示器。

系统装好后，默认也是 800x 600。

后来我把显示器改成 “通用的 1024x768 60 Hz LCD 显示器” 就 OK 了 ！

barble

[quote:4b00e2a3c6="clapton"]
how to change the video driver?
do i need to download?
my video card is also inter 845[/quote]

hi, did you solve this problem? If not, please read this article:
http://www.linuxfans.org/nuke/mo ... ewtopic&t=36419
So you need to download the new driver for your intel845:
http://downloadfinder.intel.com/ ... r.asp?ProductID=865
But at step 4, please try to change the X path as '/etc/X11', then at last, edit your 'XF86Config' file:
1) run 'vi /etc/X11/XF86Config';
2) Find 'Device' setion and edit 'Driver' item:

############Before modify##################
Section "Device"
        # no known options
        #BusID
        Identifier  "VESA driver (generic)"
        Driver      "VESA driver (generic)"   
        VendorName  "VESA driver (generic)"
        BoardName   "VESA driver (generic)"
EndSection
############End##########################

############After modify##################
Section "Device"
        # no known options
        #BusID
        Identifier  "VESA driver (generic)"
        Driver      "i810"   
        VendorName  "VESA driver (generic)"
        BoardName   "VESA driver (generic)"
EndSection
############End##########################

3) restartx your x server.