default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
port
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180 # 3 minute idle timer (the default)
enable dns # request DNS info (for resolv.conf)
papchap:
set phone PHONE_NUM
set authname USERNAME
set authkey PASSWORD
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR # Add a (sticky) default route
----------------------------------
网卡是 realtek rtl8139(A) pci fast ethernet adapter
在pci总线 从上往下数第2插槽 (共有6条pci 插槽 )
5.0 要编译内核 4.8要吗
其实网上的文章是说的混乱的 没说明是什么版本 搞的我不知所错
ifconfig
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
-----ether **:**:**:**:**
-----media: Ethernet autoselect (10baseT/UTP)
-----status: active