请问uclinux的/dev/ram0等的初始地址从那里设置阿？谢谢

yutouyutou

请问uclinux的/dev/ram0，/dev/ram1,/dev/rom0等的初始地址,大小等从那里设置阿？谢谢

ksh

size of ramdisk should be set in kernel config. You do not need to know the start address of ram disk that it will be allocated by uClinux.

bairaulinter

But how can we write into/read from the ram disk, while we don't know the start address.

ksh

That is beyond the discussion range of SkyEye. Probably you should read some linux kernel book  or ask this question in linux kernel forum.