|
发表于 2006-12-30 12:38:15
|
显示全部楼层
1,是不是声音比较轻,放大点看看。
2,什么叫不能识别?
3,Message: 12
Date: Tue, 19 Sep 2006 15:31:58 +0200
From: alex <[email protected]>
Subject: Re: MMCONFIG & MCFG (e820)
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset="UTF-8"
Quote:
Trond Danielsen wrote:
On 9/5/06, Dave Jones wrote:
Quote:On Tue, Sep 05, 2006 at 06:38:44PM +0600, SERGIE wrote:
Quote:This is my dmesg... On setting `quiet' parameter to the
kernel a problem arise
on STDERR, which says (these strings somewhere below):
===
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
===
What could be the attempts I would try to get rid of this problem. I
tried
setting "Direct" in kernel PCI Access Mode - it works well. However I
want to
use "any" option, which chooses MMCONFIG first...
Please help if someone is able to...
As the message states, it's a BIOS bug.
Look for an update from your motherboard vendor.
Dave
May I ask what motherboard you are using? I get the same error on my
Asus S5A laptop.
--
Trond Danielsen
The same error occurs on my Benq S72G-110. Its motherboard is Intel
915PM.
It occurs after I upgrade the kernel from 2.6.15 to 2.6.17 as I need
to install the latest ATI driver.
Is there any way to solve the issue?
David Cooke Writes, I get these same messages at boot. Running a new machine
with FC5. Mother board is Intel D945GTP. I have couple of bios fixes
downloaded from
http://support.intel.com/support/mot...sktop/d945gtp/
but requires boot from floppy. If you find your MB listed and do decide to update, let
me know if they work so I won't waste time with it.
David
=========================
上面的做法只是屏蔽了mmconfig
应该是系统共享地址出的bug,以后会改好的吧
4,耐心等待一下,等地震弄坏的光缆修好,去国外的网站看看。 |
|