怎样与安装ｗｉｎｄｏｗｓＸＰ的机器互连?

laodaqiu

在ｗｉｎ２０００下已经与台安装ｗｉｎＸＰ的计算机连通了,我在ｌｉｎｕｘ下把我的机器的IP设置成１９２.１６８.２７.１(另一台安立装ｗｉｎＸＰ的机器的IP为１９
２.１６８.２７.２),我在ｌｉｎｕｘ下用ｐｉｎｇ我的机器好像通了但显示了很多数据(显示的数据看下面),安样是否正常呢,我不太清楚ｌｉｎｕｘ的ｐｉｎｇ命令,但面
ｗｉｎｄｏｗｓ下的ｐｉｎｇ命令只会显示四行的数据(如果我不终断这个任务白话它会继续显示下去的),我再ｐｉｎｇ那台安装ｗｉｎＸＰ的机器就完全ｐｉｎｇ不通了!

[root@localhost root]# ping 192.168.27.1
PING 192.168.27.1 (192.168.27.1) from 192.168.27.1 : 56(84) bytes of data.
Warning: time of day goes back, taking countermeasures.
64 bytes from 192.168.27.1: icmp_seq=0 ttl=255 time=973 usec
64 bytes from 192.168.27.1: icmp_seq=1 ttl=255 time=120 usec
64 bytes from 192.168.27.1: icmp_seq=2 ttl=255 time=116 usec
64 bytes from 192.168.27.1: icmp_seq=3 ttl=255 time=118 usec
64 bytes from 192.168.27.1: icmp_seq=4 ttl=255 time=113 usec
64 bytes from 192.168.27.1: icmp_seq=5 ttl=255 time=105 usec
64 bytes from 192.168.27.1: icmp_seq=6 ttl=255 time=118 usec
64 bytes from 192.168.27.1: icmp_seq=7 ttl=255 time=117 usec
64 bytes from 192.168.27.1: icmp_seq=8 ttl=255 time=118 usec
64 bytes from 192.168.27.1: icmp_seq=9 ttl=255 time=108 usec
64 bytes from 192.168.27.1: icmp_seq=10 ttl=255 time=117 usec
64 bytes from 192.168.27.1: icmp_seq=11 ttl=255 time=107 usec
64 bytes from 192.168.27.1: icmp_seq=12 ttl=255 time=107 usec
64 bytes from 192.168.27.1: icmp_seq=13 ttl=255 time=118 usec
64 bytes from 192.168.27.1: icmp_seq=14 ttl=255 time=112 usec
64 bytes from 192.168.27.1: icmp_seq=15 ttl=255 time=120 usec
64 bytes from 192.168.27.1: icmp_seq=16 ttl=255 time=114 usec
64 bytes from 192.168.27.1: icmp_seq=17 ttl=255 time=117 usec
64 bytes from 192.168.27.1: icmp_seq=18 ttl=255 time=116 usec
64 bytes from 192.168.27.1: icmp_seq=19 ttl=255 time=107 usec
64 bytes from 192.168.27.1: icmp_seq=20 ttl=255 time=111 usec

[1]+  Stopped                 ping 192.168.27.1