StrongArm (Help needed)

Devanshu

Hi Guys,
I am trying to simulate ecos on Strong ARM(sa1110) through Skyeye. My skyeye.conf file is as follows:

cpu: sa1100
mach: sa1100

#RAM
mem_bank: map=M, type=RW, addr=0xC0000000, size=0x08000000
mem_bank: map=M, type=RW, addr=0xC8000000, size=0x08000000
mem_bank: map=M, type=RW, addr=0xD0000000, size=0x08000000
mem_bank: map=M, type=RW, addr=0xD8000000, size=0x08000000
#ROM
mem_bank: map=M, type=RW, addr=0x00000000, size=0x20000000
#IO
mem_bank: map=I, type=RW, addr=0x20000000, size=0x20000000

I am able to load the image file successfully but when I try to run it, Skyeye gives segmentation fault. Please help.

thanx in advance
Devanshu.