求救,我的winex还是不能看到中文.

babo

我还是不能在winex下看中文

以下是我winex的config文件(于字体有关的部分)
[fonts]
;Read documentation/fonts before adding aliases
"Resolution" = "96"
"dir1"="/usr/system/truetype"
"Default" = "-misc-SimSun-"

[FontPatterns]
"Pattern0" = "-misc-SimSun-medium-r-normal--0-0-0-0-c-0-gbk-0"
"Pattern1" = "-misc-fixed-medium-r-normal--0-0-0-0-c-0-gbk-0"
"Pattern2" = "-misc-SimSun-medium-r-normal--0-0-0-0-c-0-gb2312.1980-0"
"Pattern3" = "-misc-SimSun-medium-r-normal--0-0-0-0-c-0-gb2312.1980-0"
"Pattern4" = "-misc-SimSun-medium-r-normal--0-0-0-0-c-0-gb2312.1980-0"
请帮我看看问题出在哪里?

KanKer

skylove
发表于: 2003-03-26, 10:35pm    发表主题:   

--------------------------------------------------------------------------------

首先安装unifont字体
改config文件中字体段

[fonts]
"Resolution" = "96"
"Default" = "-gnu-unifont*"
[FontPatterns]
"Pattern0" = "-gnu-unifont*"
"Pattern1" = "-gnu-unifont*"
"Pattern2" = "-gnu-unifont*"
"Pattern3" = "-gnu-unifont*"
"Pattern4" = "-gnu-unifont*"

字体在
ftp://202.38.127.33/pub/redhat-7.1/powertools/i386/SRPMS/unifont-20000122-2.src.rpm
可以装上，不过要自己改下/usr/X11R6/lib/X11/fonts/misc目录里的fonts.dir

babo

我用的simsun的字体不行吗?
我的simsun的字体放在了/usr/system/truetype下面,怎魔就是不行?
一定要安装unifont吗?

wellinux

这样好像不行啊，昨天试了一下，连X也进不去，
最后还是要把
/usr/X11R6/lib/X11/fonts/misc目录里的fonts.dir
改回来，
真险

KanKer

见下贴:
http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=8554&start=15