rh9一直不能上网(港湾认证),很是郁闷啊

rmblover

rh9一直不能上网(港湾认证),很是郁闷啊
mdc-ssd ,xsupplicant都是过,
mdc-我按照mdc-ssd的方法,安装修改部分内容之后,在root/下键入mdc-ssd提示:
[root@localhost root]# mdc-ssd
mdc-ssd options in effect:
nodetach                # (from /etc/mdc-ssd/options)
logfd 1         # (from /etc/mdc-ssd/options)
dump            # (from /etc/mdc-ssd/options)
TLSdebug                # (from /etc/mdc-ssd/options)
TLSstate                # (from /etc/mdc-ssd/options)
TLSbugs         # (from /etc/mdc-ssd/options)
mdc-ssd: mdc-ssd TLS: cert file: /etc/mdc-ssd/eth0/mycert.pem
mdc-ssd: mdc-ssd TLS: key file:
mdc-ssd: unable to get private key from '/etc/mdc-ssd/eth0/mycert.pem'
mdc-ssd: mdc-ssd:TLS error setting user certificate/private key information.
mdc-ssd: Unable to configure Transport Layer Security (TLS).
mdc-ssd: 802.1X: txStart(port=1) (transmit an EAP start packet)
mdc-ssd: 802.1X: supp state -> SSM_CONNECTING for port 1
mdc-ssd: 802.1X: EAP request-ID received.
mdc-ssd: mdc-ssd: txRspId(Transmit our identity (sjxx173) to authenticator)
mdc-ssd: 802.1X: supp state -> SSM_ACQUIRED for port 1
mdc-ssd: 802.1X: Received a authentication request packet with authentication
ty                                                             pe: 4.
mdc-ssd: 802.1X: txRspAuth(Transmitting a reply to authenticator for authentic
at                                                             ion type=4
mdc-ssd: 802.1X: supp state -> SSM_AUTHENTICATING for port 1
mdc-ssd: 802.1X: EAP success received for interface - eth0.
mdc-ssd: 802.1X: supp state -> SSM_AUTHENTICATED for port 1
然后就停下了!!!找不到key文件????
在浏览器输入www.online.sh.cn,提示!!!不能打开
xsupplicant根本没有下载到可用的.tar.gz 文件
谁有麻烦传一个过来,[email protected]
还有听说xsupplicant 要kernel2.6.以上的,我的是2.4.20-8不知道可以吗??