解决一部分tv tuner/视频卡无法在2.6.x工作的问题

我爱DDR

……我查了一下，saa7130应该是和我那卡的cx88为同一类东西，也就是说，你看的不对。兄弟你能把你的有关电视卡的自检信息贴出来吗？

我爱DDR

我从网上抄了一段自检信息，是saa7134的。兄弟看看：
> Linux video capture interface: v1.00
> saa7130/34: v4l2 driver version 0.2.13 loaded
> saa7130/34: snapshot date 2005-05-25
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
> saa7134[0]: found at 0000:00:09.0, rev: 1, irq: 17, latency: 32, mmio:
> 0xcfff7c00
> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
> [card=50,autodetected]
> saa7134[0]: board init: gpio is c806000
> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> tuner 1-0060: chip found @ 0xc0 (saa7134[0])
> tuner 1-0060: microtune: companycode=3cbf part=42 rev=2f
> tuner 1-0060: microtune MT2050 found, OK
> tda9885/6/7: chip found @ 0x86
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> saa7134[0]: pinnacle 300i dvb setup
> DVB: registering new adapter (saa7134[0]).
> DVB: registering frontend 0 (Zarlink MT352 DVB-T)...

红字才是关键，而不是那个saa7134。

dalin

[quote:881053af3b="kufengt"]tx@linux:~> mobprobe saa7130
bash: mobprobe: command not found
我敲这个命令则么会这样阿[/quote]因为你把命令敲错了
是modprobe