QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 4913|回复: 7

关于编译busybox的问题

[复制链接]
发表于 2005-12-5 14:04:12 | 显示全部楼层 |阅读模式
我配置完busybox后然后编译并没有报错不过出现以下提示:
you will probably need to make your busybox binary setuid root to ensure all configured applets will work properly.
这是不是说我的配置文件里有什么东西没有配置好?我的配置如下:
#
# Automatically generated make config: don't edit
#
HAVE_DOT_CONFIG=y

#
# General Configuration
#
# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_FEATURE_VERBOSE_USAGE=y
# CONFIG_FEATURE_INSTALLER is not set
# CONFIG_LOCALE_SUPPORT is not set
# CONFIG_FEATURE_DEVFS is not set
CONFIG_FEATURE_DEVPTS=y
# CONFIG_FEATURE_CLEAN_UP is not set
CONFIG_FEATURE_SUID=y
# CONFIG_FEATURE_SUID_CONFIG is not set
# CONFIG_SELINUX is not set

#
# Build Options
#
CONFIG_STATIC=y
CONFIG_LFS=y
USING_CROSS_COMPILER=y
CROSS_COMPILER_PREFIX="/usr/local/arm/3.3.4-glibc-2.3.2/bin/arm-linux-"
EXTRA_CFLAGS_OPTIONS=""

#
# Installation Options
#
# CONFIG_INSTALL_NO_USR is not set
PREFIX="/home/besxmx/rootdir/rootfs"

#
# Archival Utilities
#
# CONFIG_AR is not set
CONFIG_BUNZIP2=y
# CONFIG_CPIO is not set
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
CONFIG_GUNZIP=y
CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
CONFIG_GZIP=y
# CONFIG_RPM2CPIO is not set
CONFIG_RPM=y
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
CONFIG_FEATURE_TAR_BZIP2=y
# CONFIG_FEATURE_TAR_FROM is not set
CONFIG_FEATURE_TAR_GZIP=y
# CONFIG_FEATURE_TAR_COMPRESS is not set
CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
CONFIG_UNCOMPRESS=y
CONFIG_UNZIP=y

#
# Common options for cpio and tar
#
# CONFIG_FEATURE_UNARCHIVE_TAPE is not set

#
# Coreutils
#
CONFIG_BASENAME=y
# CONFIG_CAL is not set
CONFIG_CAT=y
CONFIG_CHGRP=y
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_CHROOT=y
CONFIG_CMP=y
CONFIG_CP=y
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
CONFIG_DD=y
CONFIG_DF=y
CONFIG_DIRNAME=y
# CONFIG_DOS2UNIX is not set
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
CONFIG_EXPR=y
CONFIG_FALSE=y
# CONFIG_FOLD is not set
CONFIG_HEAD=y
# CONFIG_FEATURE_FANCY_HEAD is not set
# CONFIG_HOSTID is not set
CONFIG_ID=y
CONFIG_INSTALL=y
# CONFIG_LENGTH is not set
CONFIG_LN=y
# CONFIG_LOGNAME is not set
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
# CONFIG_MD5SUM is not set
CONFIG_MKDIR=y
# CONFIG_MKFIFO is not set
CONFIG_MKNOD=y
CONFIG_MV=y
# CONFIG_OD is not set
CONFIG_PRINTF=y
CONFIG_PWD=y
# CONFIG_REALPATH is not set
CONFIG_RM=y
CONFIG_RMDIR=y
# CONFIG_SEQ is not set
# CONFIG_SHA1SUM is not set
CONFIG_SLEEP=y
# CONFIG_FEATURE_FANCY_SLEEP is not set
CONFIG_SORT=y
# CONFIG_STTY is not set
CONFIG_SYNC=y
CONFIG_TAIL=y
CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_TEE=y
CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_TEST=y

#
# test (forced enabled for use with shell)
#
# CONFIG_FEATURE_TEST_64 is not set
CONFIG_TOUCH=y
CONFIG_TR=y
CONFIG_TRUE=y
CONFIG_TTY=y
CONFIG_UNAME=y
CONFIG_UNIQ=y
CONFIG_USLEEP=y
# CONFIG_UUDECODE is not set
# CONFIG_UUENCODE is not set
# CONFIG_WATCH is not set
CONFIG_WC=y
# CONFIG_WHO is not set
CONFIG_WHOAMI=y
CONFIG_YES=y

#
# Common options for cp and mv
#
CONFIG_FEATURE_PRESERVE_HARDLINKS=y

#
# Common options for ls and more
#
CONFIG_FEATURE_AUTOWIDTH=y

#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y

#
# Console Utilities
#
CONFIG_CHVT=y
CONFIG_CLEAR=y
CONFIG_DEALLOCVT=y
# CONFIG_DUMPKMAP is not set
# CONFIG_LOADFONT is not set
# CONFIG_LOADKMAP is not set
CONFIG_OPENVT=y
CONFIG_RESET=y
# CONFIG_SETKEYCODES is not set

#
# Debian Utilities
#
CONFIG_MKTEMP=y
# CONFIG_PIPE_PROGRESS is not set
CONFIG_READLINK=y
# CONFIG_RUN_PARTS is not set
# CONFIG_START_STOP_DAEMON is not set
CONFIG_WHICH=y

#
# Editors
#
# CONFIG_AWK is not set
CONFIG_PATCH=y
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y

#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
# CONFIG_FEATURE_FIND_NEWER is not set
# CONFIG_FEATURE_FIND_INUM is not set
CONFIG_GREP=y
CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_FEATURE_GREP_FGREP_ALIAS=y
CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_XARGS=y
# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y

#
# Init Utilities
#
CONFIG_INIT=y
CONFIG_FEATURE_USE_INITTAB=y
CONFIG_FEATURE_INITRD=y
# CONFIG_FEATURE_INIT_COREDUMPS is not set
CONFIG_FEATURE_INIT_SWAPON=y
CONFIG_FEATURE_EXTRA_QUIET=y
CONFIG_HALT=y
CONFIG_POWEROFF=y
CONFIG_REBOOT=y
# CONFIG_MESG is not set

#
# Login/Password Management Utilities
#
# CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_ADDGROUP is not set
# CONFIG_DELGROUP is not set
# CONFIG_ADDUSER is not set
# CONFIG_DELUSER is not set
# CONFIG_GETTY is not set
# CONFIG_LOGIN is not set
# CONFIG_PASSWD is not set
# CONFIG_SU is not set
# CONFIG_SULOGIN is not set
# CONFIG_VLOCK is not set

#
# Miscellaneous Utilities
#
# CONFIG_ADJTIMEX is not set
# CONFIG_CROND is not set
# CONFIG_CRONTAB is not set
# CONFIG_DC is not set
# CONFIG_DEVFSD is not set
# CONFIG_LAST is not set
# CONFIG_HDPARM is not set
# CONFIG_MAKEDEVS is not set
# CONFIG_MT is not set
# CONFIG_RX is not set
CONFIG_STRINGS=y
CONFIG_TIME=y
# CONFIG_WATCHDOG is not set

#
# Linux Module Utilities
#
CONFIG_INSMOD=y
CONFIG_FEATURE_2_4_MODULES=y
CONFIG_FEATURE_2_6_MODULES=y
CONFIG_FEATURE_INSMOD_VERSION_CHECKING=y
CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
CONFIG_FEATURE_INSMOD_LOAD_MAP=y
CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
CONFIG_LSMOD=y
CONFIG_MODPROBE=y
CONFIG_RMMOD=y
CONFIG_FEATURE_CHECK_TAINTED_MODULE=y

#
# Networking Utilities
#
CONFIG_FEATURE_IPV6=y
# CONFIG_ARPING is not set
CONFIG_FTPGET=y
CONFIG_FTPPUT=y
CONFIG_HOSTNAME=y
CONFIG_HTTPD=y
# CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY is not set
CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
# CONFIG_FEATURE_HTTPD_SETUID is not set
# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
CONFIG_FEATURE_HTTPD_CGI=y
# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
# CONFIG_FEATURE_IFCONFIG_SLIP is not set
# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
# CONFIG_FEATURE_IFCONFIG_HW is not set
# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
# CONFIG_IFUPDOWN is not set
CONFIG_INETD=y
CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO=y
CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD=y
CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME=y
CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME=y
CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN=y
# CONFIG_IP is not set
# CONFIG_IPCALC is not set
# CONFIG_IPADDR is not set
# CONFIG_IPLINK is not set
# CONFIG_IPROUTE is not set
# CONFIG_IPTUNNEL is not set
# CONFIG_NAMEIF is not set
# CONFIG_NC is not set
# CONFIG_NETSTAT is not set
# CONFIG_NSLOOKUP is not set
CONFIG_PING=y
CONFIG_FEATURE_FANCY_PING=y
CONFIG_PING6=y
CONFIG_FEATURE_FANCY_PING6=y
CONFIG_ROUTE=y
CONFIG_TELNET=y
CONFIG_FEATURE_TELNET_TTYPE=y
CONFIG_FEATURE_TELNET_AUTOLOGIN=y
# CONFIG_TELNETD is not set
CONFIG_TFTP=y
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
CONFIG_FEATURE_TFTP_BLOCKSIZE=y
CONFIG_FEATURE_TFTP_DEBUG=y
# CONFIG_TRACEROUTE is not set
# CONFIG_VCONFIG is not set
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_FEATURE_WGET_IP6_LITERAL=y

#
# udhcp Server/Client
#
# CONFIG_UDHCPD is not set
# CONFIG_UDHCPC is not set

#
# Process Utilities
#
CONFIG_FREE=y
CONFIG_KILL=y
CONFIG_KILLALL=y
CONFIG_PIDOF=y
CONFIG_PS=y
CONFIG_RENICE=y
CONFIG_TOP=y
FEATURE_CPU_USAGE_PERCENTAGE=y
CONFIG_UPTIME=y
CONFIG_SYSCTL=y

#
# Another Bourne-like Shell
#
CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_FEATURE_SH_IS_LASH is not set
# CONFIG_FEATURE_SH_IS_MSH is not set
# CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_ASH=y

#
# Ash Shell Options
#
CONFIG_ASH_JOB_CONTROL=y
CONFIG_ASH_ALIAS=y
CONFIG_ASH_MATH_SUPPORT=y
CONFIG_ASH_MATH_SUPPORT_64=y
# CONFIG_ASH_GETOPTS is not set
# CONFIG_ASH_CMDCMD is not set
# CONFIG_ASH_MAIL is not set
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
# CONFIG_ASH_RANDOM_SUPPORT is not set
# CONFIG_HUSH is not set
# CONFIG_LASH is not set
# CONFIG_MSH is not set

#
# Bourne Shell Options
#
# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
CONFIG_FEATURE_COMMAND_EDITING=y
CONFIG_FEATURE_COMMAND_HISTORY=100
CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
CONFIG_FEATURE_SH_FANCY_PROMPT=y

#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
# CONFIG_FEATURE_IPC_SYSLOG is not set
CONFIG_KLOGD=y
CONFIG_LOGGER=y

#
# Linux System Utilities
#
CONFIG_DMESG=y
# CONFIG_FBSET is not set
# CONFIG_FDFLUSH is not set
# CONFIG_FDFORMAT is not set
CONFIG_FDISK=y
FDISK_SUPPORT_LARGE_DISKS=y
CONFIG_FEATURE_FDISK_WRITABLE=y
# CONFIG_FEATURE_AIX_LABEL is not set
# CONFIG_FEATURE_SGI_LABEL is not set
# CONFIG_FEATURE_SUN_LABEL is not set
# CONFIG_FEATURE_OSF_LABEL is not set
# CONFIG_FEATURE_FDISK_ADVANCED is not set
CONFIG_FREERAMDISK=y
# CONFIG_FSCK_MINIX is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_GETOPT is not set
CONFIG_HEXDUMP=y
# CONFIG_HWCLOCK is not set
# CONFIG_LOSETUP is not set
# CONFIG_MKSWAP is not set
CONFIG_MORE=y
CONFIG_FEATURE_USE_TERMIOS=y
CONFIG_PIVOT_ROOT=y
# CONFIG_RDATE is not set
CONFIG_SWAPONOFF=y
CONFIG_MOUNT=y
CONFIG_NFSMOUNT=y
CONFIG_UMOUNT=y
CONFIG_FEATURE_MOUNT_FORCE=y

#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
# CONFIG_FEATURE_MTAB_SUPPORT is not set

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_NO_DEBUG_LIB is not set
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set

我是新手可能有很多地方配的不合理,请指教!
发表于 2005-12-6 23:10:16 | 显示全部楼层
What version of Busybox you used? I have not encountered when I compiled it...
Please paste your steps here...
回复

使用道具 举报

 楼主| 发表于 2005-12-7 09:23:32 | 显示全部楼层
The version of busybox is 1.01. I decompression it at local.
$make menuconfig          // follow the step to configure it
$make TARGET_ARCH=arm CROSS=././arm-linux- all install
after this that information will be encountered.
I think I have configured some commands but may be missing something related to it .
hope you can give me more suggestion.
回复

使用道具 举报

发表于 2005-12-7 12:29:27 | 显示全部楼层
用root用户试试
回复

使用道具 举报

 楼主| 发表于 2005-12-7 15:18:34 | 显示全部楼层
我在做这一切操作的时候都是用root用户来执行的.
回复

使用道具 举报

发表于 2005-12-7 17:52:25 | 显示全部楼层
嗯,不是用户问题。我这用什么用户都没问题。
而且我搜变整个busybox源码目录也找不到那个提示信息。
回复

使用道具 举报

发表于 2005-12-10 22:25:15 | 显示全部楼层
OK... Then only suggestion or effective way I can give is to search the info "you will probably need to make your busybox binary setuid root to ensure all configured applets will work properly" in code to see in which scenario it will occured.
回复

使用道具 举报

发表于 2006-8-14 16:55:44 | 显示全部楼层
就是没有找到配置文件 ,说的就是没有配置信息,你现清除、配置、编译试一下
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-2 12:27 , Processed in 0.151324 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表