【suse10】帮忙找找死机的原因

yggdrasil9811

搞了快一周了，不知道哪里出了问题。
机器配置：
64bit p4 3.0
160G sata 硬盘
ati x600 PCI-E显卡
15寸的清华同方液晶
512m内存
usb光电鼠标

分了1G的SWAP，另外用一个15G的分区来装suse10。

安装过程的最后一步已经改变分辩率为1024×768，还可以启动yast进行配置，
如果对当前分辨率进行测试，显示器会黑掉，然后一个漂移的框提示“输入不支持”
（就像提示“无信号”一样）。一旦重启之后，如果进x，可以听到启动音乐，
然后就会死机，键盘鼠标无反应，硬盘灯常亮，等20分钟还是这样。

failsafe模式可以进入，如果在这下面启动sax2，能看到提示“更改配置”“确定”
“取消”，然后一点更改配置就会死机。

鼠标也换过ps/2口的，还是会死机。

最后贴一下xorg.conf，大家看看有什么问题没有
# /.../
# SaX generated X11 config file
# Created on: 2005-10-16T16:08:16+0800.
#
# Version: 7.1
# Contact: Marcus Schaefer <[email protected]>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection


Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech Optical USB Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
DisplaySize 300 230
HorizSync 30-61
Identifier "Monitor[0]"
ModelName "150B (15.0 LCD MONITOR)"
Option "DPMS"
VendorName "PHILIPS"
VertRefresh 56-75
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 79.52 1024 1080 1192 1360 768 769 772 801
Modeline "1024x768" 67.48 1024 1080 1184 1344 768 769 772 797
Modeline "800x600" 47.53 800 840 920 1040 600 601 604 626
Modeline "800x600" 40.19 800 832 912 1024 600 601 604 623
Modeline "768x576" 43.52 768 800 880 992 576 577 580 601
Modeline "768x576" 37.37 768 800 880 992 576 577 580 598
Modeline "640x480" 29.84 640 664 728 816 480 481 484 501
Modeline "640x480" 25.10 640 656 720 800 480 481 484 498
EndSection


Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "Device"
BoardName "Radeon X600 (RV370) 5B62 (PCIE)"
BusID "1:0:0"
Driver "radeon"
Identifier "Device[0]"
VendorName "ATI"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Section "Extensions"
EndSection

月下刀客

会不会是显卡驱动的原因啊。试试
Section "Device"
BoardName "Radeon X600 (RV370) 5B62 (PCIE)"
BusID "1:0:0"
Driver "radeon" 　这行改成 Driver "vesa"
Identifier "Device[0]"
VendorName "ATI"
EndSection

如果这样改可以，就再另外下载ati驱动装一下。

yggdrasil9811

多谢，已经可以进x了