QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1791|回复: 4

Linux kenel 2.6.13 的ramdisk问题

[复制链接]
发表于 2005-9-16 14:24:35 | 显示全部楼层 |阅读模式
各位大虾好,本人刚刚编译了个linux 2.6.13内核在at91rm9200(arm920t)板上跑,出现问题,信息如下:
Linux version 2.6.13 (root@luojc) (gcc version 3.3.2) #12 Thu Sep 15 16:50:47 CS
T 2005
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
Machine: Atmel AT91RM9200-DK
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists
Kernel command line: mem=32M console=ttyS0,115200 initrd=0x21000000,0x600000 roo
t=/dev/ram rw init=/sbin/init
AT91: 128 gpio irqs in 4 banks
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 24448KB available (1388K code, 310K data, 84K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 6144K
NET: Registered protocol family 16
AT91 Real Time Clock driver.
AT91 Watchdog Timer enabled (5 seconds)
ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
io scheduler noop registered
io scheduler anticipatory registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
eth0: Link now 100-FullDuplex
eth0: AT91 ethernet at 0xfefbc000 int=24 100-FullDuplex (00:07:76:00:11:22)
eth0: Realtek RTL8201(B)L PHY
physmap flash device: 800000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
RedBoot partition parsing not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 204
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 84K

就停在这里不动了,我想是ramdisk的问题
各位大虾有没有相关的ramdisk的帮助,给个连接
不胜感激~~~
发表于 2005-9-25 18:29:08 | 显示全部楼层
不懂
回复

使用道具 举报

发表于 2005-10-2 07:29:12 | 显示全部楼层
楼主可以介绍一下编译的过程吗?
回复

使用道具 举报

发表于 2005-10-2 07:31:56 | 显示全部楼层
luojc,
我也在用 9200,多交流:
QQ 15808390
回复

使用道具 举报

发表于 2005-10-2 17:25:59 | 显示全部楼层
下面的帖子可能对你有用
看看吧http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=132825
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-3 02:30 , Processed in 0.109492 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表