QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 2192|回复: 1

配置问题!

[复制链接]
发表于 2005-7-29 08:32:43 | 显示全部楼层 |阅读模式
> >我买的书,按光盘的readme做,
> >在做第四步:编译带有网络支持的嵌入式操作系统--uclinux
> >其中做到:make dep 时提示错误,摘取最后错误代码为:
> >make[5]: Entering directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/net'
> >/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/scripts/mkdep
> >-D__KERNEL__
> >-I/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/include
> > -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
> >-fno-common -fno-common -pipe -fno-builtin -D__linux__ -g -DNO_MM
> >-mapcs-32 -march=armv4 -mtune=arm7tdmi -mshort-load-bytes
> >-msoft-float  -nostdinc -I
> >/usr/local/lib/gcc-lib/arm-elf/2.95.3/include --
> >3c501.c 3c503.c 3c503.h 3c505.c 3c505.h 3c507.c
> >3c509.c 3c515.c 3c523.c 3c523.h 3c527.c 3c527.h
> >3c59x.c 7990.c 7990.h 8139cp.c 8139too.c 82596.c
> >8390.c 8390.h a2065.c a2065.h ac3200.c acenic.c
> >acenic_firmware.h acenic.h aironet4500_card.c
> >aironet4500_core.c aironet4500.h aironet4500_proc.c
> >aironet4500_rid.c am79c961a.c am79c961a.h apne.c
> >ariadne2.c ariadne.c ariadne.h arlan.c arlan.h
> >arlan-proc.c at1700.c atari_bionet.c atarilance.c
> >atari_pamsnet.c atp.c atp.h au1000_eth.c au1000_eth.h
> >auto_irq.c bagetlance.c bmac.c bmac.h bonding.c
> >bsd_comp.c cs89x0.c cs89x0.h daynaport.c de4x5.c
> >de4x5.h de600.c de620.c de620.h declance.c defxx.c
> >defxx.h depca.c depca.h dgrs_asstruct.h dgrs_bcomm.h
> >dgrs.c dgrs_es4h.h dgrs_ether.h dgrs_firmware.c dgrs.h
> >dgrs_i82596.h dgrs_plx9060.h dl2k.c dl2k.h dmfe.c
> >dummy.c e2100.c eepro100.c eepro.c eexpress.c
> >eexpress.h epic100.c eql.c es3210.c eth16i.c
> >ethertap.c ewrk3.c ewrk3.h fealnx.c fec.c fec.h
> >fmv18x.c gmac.c gmac.h gt96100eth.c gt96100eth.h
> >hamachi.c hp100.c hp100.h hp.c hplance.c hplance.h
> >hp-plus.c hydra.c hydra.h i82586.h ibmlana.c ibmlana.h
> >ioc3-eth.c isa-skeleton.c jazzsonic.c kern_compat.h
> >lance.c lasi_82596.c lne390.c loopback.c lp486e.c
> >mac89x0.c mace.c mace.h macmace.c macsonic.c
> >md32_common.h mii.c mvme147.c myri_code.h myri_sbus.c
> >myri_sbus.h natsemi.c ne2.c ne2k-pci.c ne3210.c ne.c
> >netarmeth.c netarmeth.h net_init.c ni5010.c ni5010.h
> >ni52.c ni52.h ni65.c ni65.h ns83820.c oaknet.c
> >pci-scan.c pci-scan.h pci-skeleton.c pcnet32.c plip.c
> >ppp_async.c ppp_deflate.c ppp_generic.c pppoe.c
> >pppox.c ppp_synctty.c ptifddi_asm.h ptifddi.c
> >ptifddi.h rc4_locl.h rc4_skey.c rcif.h rclanmtl.c
> >rclanmtl.h rcpci45.c rrunner.c rrunner.h rtl8139.c
> >s3c4510.c s3c4510.h saa9730.c saa9730.h sb1000.c
> >sb1250-mac.c seeq8005.c seeq8005.h setup.c sgiseeq.c
> >sgiseeq.h sha1dgst.c sha_locl.h shaper.c sis900.c
> >sis900.h sk_g16.c sk_g16.h sk_mca.c sk_mca.h
> >skyeyene2k.c skyeyene2k.h slhc.c slip.c slip.h
> >smc91111.c smc91111.h smc9194.c smc9194.h smc-mca.c
> >smc-mca.h smc-ultra32.c smc-ultra.c sonic.c sonic.h
> >Space.c starfire.c stnic.c strip.c sun3_82586.c
> >sun3_82586.h sun3lance.c sunbmac.c sunbmac.h
> >sundance.c sungem.c sungem.h sunhme.c sunhme.h
> >sunlance.c sunqe.c sunqe.h tc35815.c tg3.c tg3.h
> >tlan.c tlan.h tun.c via-rhine.c wavelan.c wavelan.h
> >wavelan.p.h wd.c winbond-840.c yellowfin.c zlib.c
> >zlib.h znet.c > .depend
> >make _sfdep_appletalk _sfdep_arcnet _sfdep_e100
> >_sfdep_e1000 _sfdep_fc _sfdep_irda _sfdep_pcmcia
> >_sfdep_sk98lin _sfdep_skfp _sfdep_tokenring
> >_sfdep_tulip _sfdep_wan _sfdep_wireless
> >_FASTDEP_ALL_SUB_DIRS="appletalk arcnet e100 e1000 fc
> >irda pcmcia sk98lin skfp tokenring tulip wan wireless"
> >make[6]: Entering directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/net'
> >make -C appletalk fastdep
> >make[7]: Entering directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/n
et/appletalk'
> >/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/scripts/mkdep
> >-D__KERNEL__
> >-I/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/include
> > -Wall -Wstrict-prototypes -Wno-trigraphs -O2
> >-fno-strict-aliasing -fno-common -fno-common -pipe
> >-fno-builtin -D__linux__ -g -DNO_MM -mapcs-32
> >-march=armv4 -mtune=arm7tdmi -mshort-load-bytes
> >-msoft-float  -nostdinc -I
> >/usr/local/lib/gcc-lib/arm-elf/2.95.3/include --
> >cops.c cops_ffdrv.h cops.h cops_ltdrv.h ipddp.c
> >ipddp.h ltpc.c ltpc.h > .depend
> >make[7]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/n
et/appletalk'
> >make -C arcnet fastdep
> >make[7]: Entering directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/n
et/arcnet'
> >/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/scripts/mkdep
> >-D__KERNEL__
> >-I/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/include
> > -Wall -Wstrict-prototypes -Wno-trigraphs -O2
> >-fno-strict-aliasing -fno-common -fno-common -pipe
> >-fno-builtin -D__linux__ -g -DNO_MM -mapcs-32
> >-march=armv4 -mtune=arm7tdmi -mshort-load-bytes
> >-msoft-float  -nostdinc -I
> >/usr/local/lib/gcc-lib/arm-elf/2.95.3/include --
> >arcnet.c arc-rawmode.c arc-rimi.c com20020.c
> >com20020-isa.c com20020-pci.c com90io.c com90xx.c
> >rfc1051.c rfc1201.c > .depend
> >make[7]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/n
et/arcnet'
> >make -C e100 fastdep
> >make: Entering an unknown directory
> >make: *** e100: 没有那个文件或目录.  Stop.
> >make: Leaving an unknown directory
> >make[6]: *** [_sfdep_e100] Error 2
> >make[6]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/net'
> >make[5]: *** [fastdep] Error 2
> >make[5]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers/net'
> >make[4]: *** [_sfdep_net] Error 2
> >make[4]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers'
> >make[3]: *** [fastdep] Error 2
> >make[3]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x/drivers'
> >make[2]: *** [_sfdep_drivers] Error 2
> >make[2]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x'
> >make[1]: *** [dep-files] Error 2
> >make[1]: Leaving directory
> >`/opt/skyeye-cdrom/uClinux/uClinux-dist/linux-2.4.x'
> >make: *** [dep] Error 2
> >
> >请帮我分析错误原因,谢谢!
> >
发表于 2006-4-5 16:09:27 | 显示全部楼层
呵呵,这是linux,一切都要自己动手
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-2 22:28 , Processed in 0.039901 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表