求肋!!我的redhat9上网时一会就黑屏，是不是被黑了？

KA

我的redhat上网时一会就黑屏，是不是被黑了，还中什么毒了
要按ctrl+alt+f3然后再按ctrl+alt+f7才可以回来，要不然就一直黑屏，这是怎么回事呀

12543122

显示器刷新率超了吧

什么显卡 显示器？ 用的什么驱动？
/etc/X11/XF86Config  里面怎么设置的？

KA

你到是提醒我了，我的是笔记本，自己后装的linux redhat 9 在装时就好像没有找到显卡的驱动，现在我只能用800x600都不能用1024x768，我怎么才能驱上我的显卡呀，谢谢

KA

是这样配的，那里有什么不对的吗？请告诉我？
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/psaux"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier  "DevInputMice"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Unknown monitor"
        HorizSync    31.5 - 37.9
        VertRefresh  50.0 - 70.0
        Option            "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "i810"
        VendorName  "Videocard vendor"
        BoardName   "Intel 852"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     16
        SubSection "Display"
                Depth     16
                Modes    "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes    "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes    "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

bigcat00

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 60
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection
──────────────────
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection

──────────────
照着红色部分修改一下试试。

KA

太帅了，可以了，我那天自己瞎改了，但就是不好用，原来只改这一个就可了，呵呵，太感谢了，对了，我不用图形界面登录时怎么可以显示中文呀，我装的是中文的，有没有在命令行下显示中文呢
我的QQ是68543927
加我吧